Wire EDM | Micromachined Parts Wire EDM produces exceptionally precise, complex burr-free shapes made from sheet, tube or wire. The EDM process is generally computer-controlled (CNC) and as a result is highly accurate and repeatable.

The machines provide efficient and low-cost solutions in many applications, allowing customers to design parts for optimum function without the typical restrictions of other metalworking processes.  Our fine-hole wire EDM machines can provide holes as small as 0.003" with intersecting or cross-hole features.

Advantages of EDM: 

  • Complex shapes that would otherwise be difficult to produce with conventional cutting tools can be easily achieved.
  • Very fine holes can be easily drilled.  
  • Very small work pieces where conventional cutting tools may damage the part from excess cutting tool pressure can be easily achieved.
  • There is no direct contact between tool and work piece.
  • Delicate sections and weak materials can be machined without any distortion.
  • A good surface finish can be obtained.

Achieving high accuracy and tighter tolerances is essential for many industries. With Electrical Discharge Machining we can produce and repeat the required specifications with ease.

Wire EDM (Electrical Discharge Machine) Specifications

  • Surface finish to Ra 16µ in.
  • Cut widths down to 0.003"(0.075mm)
  • Tolerances down to ± 0.0002" (0.005mm)
  • Inside corner radiuses down to 0.002" (0.051mm)
« Back «